Canon iR1600 Series Service Manual page 614

CHAPTER 14 VERSION UP
6) When the screen indicates the end of installation, click 'Finish'.
7) Click 'Yes' to re-start the PC.
If You Cannot Install the USB Driver
You will not be able to install the USB driver to a PC (Windows 98/98SE)
if you stopped the installation in the middle. (Thereafter, if you connect
Memo
the PC and the machine with a USB cable and turn on the machine, you
will not be able to start up the "Add New Hardware Wizard, thus not be-
ing able to move on.)
To avoid the problem, be sure to go through steps 1 through 5 shown be-
low. If you deleted the registry information other than the information in-
dicated, you may not be able to start up Windows. Be sure to take full
care.
14-8
COPYRIGHT© 2002 CANON INC.
F14-202-08
F14-202-09
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002