Canon iR1600 Series Service Manual page 356

CHAPTER 11 INSTALLATION
7) With the G3 multiport [1] hooked in
place, disconnect the connector (J33)
[2] from the image processor PCB.
8) Remove the multiport unit [1], and dis-
connect the 2 connectors [2] from the
NCU PCB.
9) Remove the multiport unit [1].
11-42
COPYRIGHT© 2002 CANON INC.
[2]
[2]
[1]
[2]
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[1]
F11-703-05
F11-703-06