Installing The Firmware - Canon iR1600 Series Service Manual

CHAPTER 14 VERSION UP

2.3 Installing the Firmware

To start downloading, you need to install the firmware in question to the Service Sup-
port Tool; the individual pieces of firmware will be installed under the following names:
Firmware Built into the Machine
Model name:
iR1600 (if iR1600/iR2000)
iR1600US (iR1600/iR2000 120V for USA)
iR1610 (if iR1610E//iR2010)
iR1610US (iR1610F/iR2010F 120V for USA)
Unit name
Image processor PCB : System
G3 multiport PCB : G3FAX
Finisher-L1
Model name : Fin-L1
Unit name
Finisher controller PCB : CPU
The iR1600 group (iR1600/iR2000) and the iR1610 group (iR1610F/iR2010F) use dif-
ferent firmware items.
When downloading firmware, select the model name for Service Support Tool as fol-
lows.
For iR1600/iR2000, select iR1600.
For iR1600/iR2000 (120V for USA), select iR1600US.
For iR1610F/iR2010F, select iR1610.
For iR1610F/iR2010F (120V for USA), select iR1610US.
14-10
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002