Canon iR1600 Series Service Manual page 211

13) Remove the 8 screws [9], and detach
the support plate [10].
In the absence of the support,
take care not to impose a load
on the reader unit. Take care
not to use the wrong screw: the
4 screws to be used at the top
are 3 mm in diameter, while
the 4 screws to be used at the
bottom is 4 mm in diameter.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 6 PICKUP/FEDING SYSTEM
[9]
[9]
[9]
[10]
[9]
F06-503-04
[10]
[9]
[9]
[9]
6-29