Adjusting The Image Position For Adf Copying - Canon iR1600 Series Service Manual

2.1.5 Adjusting the Image Position for ADF Copying

1) Adjust the image leading edge margin by making the following selections in service
mode: #6 SCANNER>7. CCD>parameter 024.
A higher setting will decrease the margin A.
A lower setting will increase the margin A.
Adjustment value of 1 = 0.1 mm (range of adjustment: 0 to 9999; default: 235)
2) Adjust the left/right image margin by making the following selections in service
mode: #6 SCANNER>7. CCD>parameter 022.
A higher setting will decrease the margin A.
A lower setting will increase the margin A.
Adjustment value 1 = 0.04 mm (range of adjustment: 0 to 9999; default: 128)
Higher setting
(an increase of '1' will
decrease the margin by
0.04 mm)
COPYRIGHT© 2002 CANON INC.
Lower setting
(a of '1' will increase the margin by 0.1 mm)
A
Higher setting (an increase of '1' will decrease the
margin by 0.1 mm)
F13-201-09
F13-201-10
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
Leading edge of paper
Image edge
Lower setting
(a decrease of '1' will
increase the margin by 0.04 mm)
A
0
2
4
6
8
10
13-9