Canon iR1600 Series Service Manual page 553

[10] code generated by the modem in the event that the communication ends in error (not
used in service)
[11] transmission status of the modem in the event that the communication ends in error
(not used in service)
[12] reception status of the modem in the even that the communication ends in error (not
used in service)
[13] bits 1 through 56 or 96 of received DIS, DCS, or DTC.
[14] bits 1 through 56 or 96 of transmitted DIS, DCS, or DTC
[15] RX = procedure signal received
TX = procedure signal transmitted
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
13-175