CHAPTER 13 TROUBLESHOOTING
[No. 30]
Use it to correct the image read ratio in main scanning direction for ADF mode. A higher
setting will lengthen the image in main scanning direction.
[No. 31]
Use it to correct the image read ratio in sub scanning direction for book mode. A higher
setting will lengthen the image in sub scanning direction.
[No. 32]
Use it to correct the image read ratio in sub scanning direction for ADF mode. A higher
setting will lengthen the image in sub scanning direction.
#6 SCANNER-8 MODEL
If you select 'TYPE A' for '8. MODEL', the original size detecting function will note be
used; if you select 'TYPE B' on the other hand, the original size detection function will be
used.
If you replaced the image processor PCB of a model equipped with an
original detection function, be sure to select 'TYPE B' for '10. MODEL'.
Memo
Otherwise, you will not be able to use the original size detection function
when the machine is in book mode. If the machine is not equipped with
an original detection function, on the other hand, check to make sure that
the selection is 'TYPE A'.
13-124
COPYRIGHT© 2002 CANON INC.
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002