Canon iR1600 Series Service Manual page 591

Hide thumbs Also See for iR1600 Series:
Table of Contents

Advertisement

##0675 [RX]
In V.34 reception, the procedure fails to move from phase 3 or
phase 4 to a control channel or later, causing a T1 time-over condi-
tion
Cause:
In phase 3 or phase 4, the other party cannot receive the signal correctly, and dis-
connect the line.
Remedy:
(1) Increase the transmission level so that the other party may receive the signal
(2) Prohibit the V.8/V.34 procedure.
Cause:
In phase 3 or phase 4, the signal from the other party cannot be received correctly.
Remedy:
(1) Ask the operator of the other party to increase the transmission level so that the
(2) Prohibit the V.8/V.34 procedure.
##0750 [TX]
In ECM transmission, no significant signal can be received after
transmission of PPS-NULL, and the allowed number of procedure
signal re-transmissions was exceeded
Cause:
The line condition is poor, and the other party cannot receive PPS-NULL correctly.
Remedy:
(1) Increase the transmission level so that the other party may receive PPS-NULL
(2) Adjust the NL equalizer so that the other party may receive PPS-NULL cor-
(3) Add an echo protect tone to the V.29 modem signal for transmission.
Cause:
The line condition is poor, and the significant signal cannot be received correctly.
Remedy:
Ask the operator of the other party to increase the transmission level so that the sig-
nal may be received correctly.
##0752 [TX]
In ECM transmission, DCN was received after transmission of
PPS-NULL
Cause:
The line condition is poor, and the other party cannot receive PPS-NULL correctly.
Remedy:
(1) Increase the transmission level so that the other party may receive PPS-NULL
(2) Adjust the NL equalizer so that the other party may receive PPS-NULL cor-
(3) Add an echo protect tone to the V.29 modem signal for transmission.
Cause:
The Stop key was pressed during a communication.
Remedy:
Transmit once again.
COPYRIGHT© 2002 CANON INC.
correctly.
signal may be received correctly.
correctly.
rectly.
correctly.
rectly.
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
13-213

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2010 seriesIr2000 seriesIr1610 series

Table of Contents