Removing The Multifeeder Pickup Roller - Canon iR1600 Series Service Manual

5.2.2 Removing the Multifeeder Pickup Roller

1) Remove the durm unit.
2) Remove the developing assembly
(7.2.1 in Chapter5).
3) Remove the multifeeder tray.
4) Remove the 2 stepped screws [1] using
a screwdriver; then, keeping your
hands as shown, detach the pickup
guide assembly [2] by lifting it upward
to the front.
5) Remove the manual feed pickup roller
[3].
When Mounting
After mounting the multifeeder
pickup roller, rotate the
multifeeder pickup roller until
it stops, and check to make
sure that the cam [4] is as
shown.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 6 PICKUP/FEDING SYSTEM
[1]
F06-502-03
[4]
[3]
F06-502-04
6-25