EPSON AcuLaser CX11/CX11F
1.3.2 Basic Functions
1.3.2.1 Print Mode
BUTTON FUNCTIONS
Button name
Idling
Copy button
Moves to copy mode
FAX button
Moves to fax mode
Scan button
Moves to scan mode
Setup button
Moves to setup mode Waits for the engine to stop,
One touch speed dial A/
Moves to fax mode,
One touch speed dial B/
and dials the registered
One touch speed dial C
number.
Advanced/Menu button
Invalid
Reset button
Invalid
Up button/
Multiple warnings
Down button
detected
Left button/
Invalid
Right button
Speed dial button
Invalid
Redial button
Invalid
Cancel button
Invalid
Asterisk/Hash buttons
Invalid
Ten-key
Invalid
Start Buttons
Invalid
Note *1: All the modes become inoperative when system error occurred.
*2: If the error that requires user intervention to be cleared has occurred, users cannot switch modes until they cancel the error.
If there is an error concerning device that is diagnosed as device failure at start-up, switching between modes is impossible.
During printing
Invalid
Invalid
Moves to fax mode
Invalid
Moves to scan mode
Invalid
Invalid
and moves to setup mode.
Moves to fax mode, and
Invalid
dials the registered number.
Invalid
Invalid
Invalid
Invalid
Multiple warnings detected Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
1. Short press:
Local: Invalid
Cancels Job
Network: Turns the power off when scanning
2. Long press (hold for
is NOT in progress. During scanning, cancels
more than three
the scanning while keeping the power on.
seconds)Cancels all jobs
When scanning and printing occur at the same
time, the former has priority.
Invalid
Invalid
Invalid
Invalid
Invalid
Local: InvalidStarts scanning when scanning is
NOT in progress. Invalid during scanning.
Twain
Warning is displayed when receiving data
from the fax board. After receiving the data,
the current mode can be switched.
Moves to fax mode
Moves to scan mode
Waits for the engine to stop, and moves to
setup mode.
Moves to fax mode, and dials the registered
number.
Invalid
Multiple warnings detected
Invalid
Invalid
Invalid
Invalid
1. Short press: Cancels Job
2. Long press (hold for more than three
seconds)Cancels all jobs
Invalid
Invalid
Invalid
manuals4you.com
manuals4you.com
Fax printing
Unable to move to copy mode. In
copy mode, switches to print mode.
Moves to fax mode. In fax mode,
switch to print mode.
Moves to scan mode. In scan mode,
switch to print mode.
Moves to setup mode. In setup mode,
switch to print mode.
Moves to fax mode, and dials the
registered number.
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
1. Recoverable error: Clears the error
2. Unrecoverable error:
Displays [Error cannot be cleared].
Revision B
*1,2
Error
52
Need help?
Do you have a question about the AcuLaser CX11 and is the answer not in the manual?