Forwarder Type; Interface Number: Encapsulation Type; From The Configure Menu, Select Configure Network Service -> Pvc Table. Then Configure The Following - Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual

From the Configure menu, select Configure LAN
2
Connection -> LAN Connection Table. Then
configure the following.
Prompt
Entry
Number:
LAN
Forwarder
Type:
Router
Interface
Number:
Encapsulation
Type:
From the Configure menu, select Configure Network
3
Service -> Route Selection Table. Then configure the
following.
Prompt
Entry
Number:
Address:
#1
Destination:
From the Configure menu, select Configure Network
4
Service -> PVC Table. Then configure the following.
Prompt
Entry
Number:
Source:
#1
Destination:
Enter Result/Description
1 References this
table record.
ROUT Specifies that the
LAN connection is
to pass routed
traffic.
5 Identifies the router
interface number
being configured.
RFC1294 Specifies the type
of encapsulation
used for this LAN.
Enter Result/Description
1 References this
table record
100 Identifies the
address to be
routed.
FRI-1S1 Calls with a
network address
corresponding to
this destination.
Enter Result/Description
1 Identifies the PVC
Table entry being
configured.
FRI-1S2 Specifies the PVC
source.
LCON-1 Identifies the PVC
destina tion.
The LAN
Connection Table
appears.
The Route
Selection Table
appears.
The PVC Table
appears.