Change Warm Up Time; Machine State Led Setting - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

Field Service Ver. 1.0 Oct. 2007

Change Warm Up Time

• To change the warm up time.

• With the warm-up time set to mode 1, if monochrome printing is made immediately

after a warm-up cycle and a paper curl problem occurs, change the setting to mode2.

• With the use of recycled or low quality paper, if a paper curl problem or other paper

curl related failures occur immediately after a normal warm-up cycle, set the setting

to mode 3 or mode 4. Other paper curl related failures include jam, paper ejection

failure, and punch/staple/fold position failure.

The following table shows the warm-up time (normal warm-up) in each mode.

Mode 4 Monochrome: 130 sec./Color: 130 sec.

• The default setting is Mode 1.

• To set how to display main body statuses on the machine state LED (state display

lamp, paper empty lamp).

• Each of Type1 and Type2 has the following LED display forms.

Amount of paper

(Tray 1 and 2)

Amount of paper

(Tray 3 and 4, LCT)

• Each default setting is Type1.

Monochrome: 75 sec./Color: 75 sec.

Machine State LED Setting

100 % to 66 % of paper remaining

Being lifted up

Door opened or closed

100 % to 33 % paper remaining

33 % to near empty

Being lifted up

Door opened or closed

16. Jig Software

Table of Contents