Centering (Duplex) - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
7.1.2

Centering (Duplex)

A. Control panel
1. Call the Service Mode to the screen.
See P.228 of the main body service manual.
2. Select [MachineAdjustment] → [Printer Area] → [Centering(Duplex)] → [Tray 3].
3. Press the Menu/Select key
4. Select [Print] and press the Menu/Select key to let the machine produce a test print.
8. Repeat steps 1 to 7 similarly for the paper feed tray 4.
9. Press the Menu/Select key
10. Turn OFF the power switch, then wait for 10 sec. or more and turn ON the power
switch.
B. Jig software
1. Call the Service Mode to the screen.
See P.228 of the main body service manual.
2. Click [Machine] → [Printer Area].
3. Select [Centering (Duplex 2nd Side)] → [3rd.].
4. Click the Start key to let the machine produce a test pattern.
A
4061F3C809DA
7. Mechanical adjustment
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value using the
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
±
2.0 mm
or keys.
A093F3E009DA
23