Konica Minolta bizhub C353P Service Manual page 259

13. Utility Mode
(6) Register HDD Lock PW
Functions • To set the lock password for the hard disk.
Use • To enter, change or delete the lock password for the hard disk.
Setting/ 1. Enter the password (20 characters) using
Procedure Select key.
NOTE
• Password using only a single letter is not acceptable.
• Don't forget the password. When the password is forgotten, the replacement of
hard disk is needed.
2. Re-enter the password to confirm.
3. Turn OFF the power switch and turn it ON again more than 10 seconds after.
(7) HDD Encryption Set
• It can be set only when the optional security kit (SC-503) is mounted.
Functions • To set encryption key necessary to mount the optional security kit SC-503.
Use • To setup security kit SC-503.
• To re-set encrypting word due to exchange of NVRAM board or etc.
NOTE
• This setting is available only when the optional security kit SC-503 is mounted.
• HDD formatting is required after this setting. Therefore it is necessary to
retrieve certain data from HDD in advance.
The following data will be lost after HDD formatting.
➀
Authentication data : Authentication mode, user authentication setting,
➁
Box setting data
➂
Job history
Setting/ 1. Select [HDD EncryptionSet].
Procedure 2. Enter encryption key (20 characters) using
Select key.
NOTE
• Double-byte and identical characters are not acceptable.
3. Turn off the power switch and turn it on again more than 10 seconds after.
4. Open [Admin. Settings] and conduct HDD formatting according to the instruction
appeared on the panel.
5. Turn off the power switch and turn it on again more than 10 seconds after.
214
Field Service Ver. 1.0 Oct. 2007
and
account track setting
: Box and text in the box, setting information of each
box
and
keys and press the Menu/
keys and press the Menu/