Pwb Box - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
11.3.31

PWB box

1. Remove the rear left cover.
See P.98
2. Remove the upper rear cover.
See P.100
3. Remove the rear right cover/1 and the rear right cover/2.
See P.99
4. Remove the lower rear cover/1 and the lower rear cover/2.
See P.101
[3] [1]
[3]
[1] [2] [1] [2]
[2] [1]
A02EF2C392DA
[4] [2]
[5]
A02EF2C393DA
[2]
[1]
A02EF2C394DA
5. Remove the harness from four edge
covers [1] and seven wire saddles
[2].
6. Disconnect the connector [1], and
remove the harness from the wire
saddle [2] and the edge cover [3].
7. Remove two screws [4], and remove
the MFP board cooling fan motor [5].
8. Remove the harness from two wire
saddles [1], and disconnect the con-
nector [2].
9. Remove three screws [3] of the cool-
ing fan motor/2.
11. Other
131