Konica Minolta bizhub C353P Service Manual page 251

Hide thumbs Also See for bizhub C353P:

Table of Contents

13. Utility Mode

(2) Enable SSL

• It will be displayed when certificate is issued from PageScope Web Connection.

• To set whether to encrypt access from other systems by SSL when using Page

Scope Data Administrator.

• To encrypt access by SSL from other systems using OpenAPI.

• The default setting is OFF.

(3) Authentication

• To set whether to authenticate access of other systems which uses OpenAPI when

using PageScope Data Administrator.

• To set authentication of the access from other systems using OpenAPI.

• The default setting is OFF.

• When setting to [ON], enter the auth. login name and the auth. password to be set.

(4) Port Number Setting

• To set the access port for other systems with OpenAPI when using PageScope Data

Administrator.

• To change the access port number for other systems with OpenAPI.

1. Select Port Number or Port Number (SSL), and press the Menu/Select key.

2. Enter the port number between 1 and 65535 using

B. Call Remote Center

• It will be displayed when the setup at the CS Remote Care center is complete.

• To call the CS Remote Care center from the administrator, when the CS Remote

Care setup is complete.

For details, see "CS Remote Care."

Field Service Ver. 1.0 Oct. 2007

Chapters

Table of Contents