Konica Minolta bizhub C353P Service Manual page 153

11. Other
[3]
B. Reinstall procedure
[2]
108
Remove the boss [1] at the rear side
of the PH unit from the locating hole
[1]
[2].
NOTE
• Since the back of the PH unit is
[2]
9J06F2C576DA
Remove the PH unit [1].
[1]
8. Follow the same procedures to
A02EF2C078DA
1. Fit the back of the PH unit [1] into the
[1]
4037F2C113DB
Field Service Ver. 1.0 Oct. 2007
pushed to the right with the two
plate springs [3], remove it by tilting
the backside of the PH unit to the
left as shown in the left illustration.
remove all PH units.
plate spring [2] of installation plate.