Konica Minolta bizhub C353P Service Manual page 320

Field Service Ver. 1.0 Oct. 2007
Step
Using the telephone line modem
Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
2. Select [Date/TimeSettings].
5
3. Input the date, time and the time zone using the
key.
See P.284
Setting the Center ID
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
6
2. Select [Basic Settings] → [Center ID], and input the Center ID (five digits).
See P.284
Setting the Device ID
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
7
2. Select [Basic Settings] → [Device ID], and input Device ID (nine digits).
See P.284
Proceed to step 9.
8
Setting the telephone number of the Center
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Center Tel Num-
9
ber].
3. Input the telephone number of the center
using 0 to 9 and [P], [T], [W], [,].
See P.284
Inputting the device telephone number
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Device Tel Num-
10
ber].
3. Input the Device telephone number using 0
to 9 and [P], [T], [W], [,].
See P.284
Procedure
Using E-mail
and keys, and press the Menu/Select
Encryption setting
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Encryption] and
select either ON or OFF.
Retransmission interval on e-mail delivery error
• When selecting [E-mail 2], set the retrans-
mission interval on e-mail delivery error in
software SW setting.
See P.277
Setting the Respond Timeout
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Response Timeout] and enter the
response timeout using the
NOTE
• Under normal conditions, there is no
need to change the default setting.
See P.284
Proceed to step 11.
15. Service Mode
and keys.
275