Konica Minolta bizhub C353P Service Manual page 807

4. Other
[1]
[2]
[1]
[2]
[1]
12
15. Remove the wire saddle [1], and dis-
[2]
4511F2C518DA
16. Remove two screws [1] and two
[1]
4511F2C519DA
17. Remove the processing tray [1].
[1]
4511F2C520DA
18. Disconnect all the connectors on the
19. Remove the board support, and then
4511F2C521DA
20. Remove the screw [1], and remove
4511F2C522DA
Field Service Ver. 1.0 Oct. 2007
connect the connector [2].
shoulder screws [2].
SD control board.
remove the SD control board [1].
the lock release lever [2].