Konica Minolta bizhub C353P Service Manual page 581

Hide thumbs Also See for bizhub C353P:

Table of Contents

2. Checking the controller firmware version

6. Check the message and press the Menu/Select key to start the firmware rewrite.

7. While the firmware rewrite is in process, the following message appears and LED line

blinks in blue.

8. On the control panel, check the message, Download Completed, which tells the firm-

ware update has been completed successfully. (LED line lights up in blue.)

9. Turn OFF the power switch.

10. Remove the compact flash from the slot.

11. Turn ON the power switch.

• When turning ON the power switch for the first time after completing the firmware

update, do not turn OFF the power switch until "Ready to Print" message or the

message that prompts you to enter a serial number appears.

• When the message that prompts you to enter a serial number appears after turning

ON the power switch, enter the serial number from [Service Mode] → [System Set-

tings] → [Enter Serial No.].

• If trouble code D3## appears after turning ON the power switch, irregularity in non-

volatile data needs to be addressed.

Firmware Update

Push [select] Key

Firmware Update

Field Service Ver. 1.0 Oct. 2007

A02EF2C258DA

A02EF2C257DA

Chapters

Table of Contents