Konica Minolta bizhub C353P Service Manual page 664

Field Service Ver. 1.0 Oct. 2007
8. Click [END].
9. Click [Exit] on the Service Mode screen.
10. Turn OFF the power switch, then wait for 10 sec. or more and turn ON the power
switch.
A
4061F3C809DA
7. Mechanical adjustment
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value using the [-] or [+] key.
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
±
2.0 mm
29