Mfp Board (Mfpb) - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
11.3.30

MFP board (MFPB)

1. Remove the rear left cover.
See P.98
2. Remove the upper rear cover.
See P.100
3. Remove the protective shield/1 and the protective shield/2.
See the steps 1 to 5 of printer control board removing procedure.
See P.127
4. Remove the rear right cover/1 and the rear right cover/2.
See P.99
5. Remove the NVRAM board.
See P.137
6. Remove the JMP board.
See P.136
7. Remove the SODIMM/1, SODIMM/2.
See P.136
[2]
[2]
[1]
A02EF2C387DA
[1]
A02EF2C388DA
8. Disconnect the flat cable [1],and
remove the connector [2].
9. Remove the screw [1], and remove
the cover [2].
11. Other
129