Change Warm Up Time - Konica Minolta bizhub C353 Service Manual

10. Service Mode
10.8.11

Change Warm Up Time

Functions • To change the warm up time.
Use • With the warm-up time set to mode 1, if monochrome printing is made immediately
after a warm-up cycle and a paper curl problem occurs, change the setting to mode2.
• With the use of recycled or low quality paper, if a paper curl problem or other paper
curl related failures occur immediately after a normal warm-up cycle, set the setting
to mode 3 or mode 4. Other paper curl related failures include jam, paper ejection
failure, and punch/staple/fold position failure.
The following table shows the warm-up time (normal warm-up) in each mode.
Mode 1
Mode 2
Mode 3
Mode 4
Setting/ • The default setting is Mode 1.
Procedure
394
bizhub C353
Monochrome: 30 sec.
Color: 41 sec.
Monochrome: 41 sec.
Color: 41 sec.
Monochrome: 41 sec.
Color: 41 sec.
Monochrome: 130 sec.
Color: 130 sec.
"Mode 1" Mode 2
Field Service Ver. 4.0 Jun. 2008
bizhub C253/C203
Monochrome: 27 sec.
Color: 37 sec.
Monochrome: 40 sec.
Color: 40 sec.
Monochrome: 40 sec.
Color: 40 sec.
Monochrome: 140 sec.
Color: 140 sec.
Mode3 Mode4