Konica Minolta bizhub C353P Service Manual page 367

16. Jig Software
Step
Using the telephone line modem
Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care], and click [Detail Setting].
5 2. Click [Date & Time Setting].
3. Input the date, time and the time zone using the 10-key pad, and click [Set].
See P.331
Setting the Center ID
1. Select [Service Mode] → [CS Remote Care], and click [Detail Setting].
6
2. Click [Machine Setting] → [Center ID], and input the Center ID (five digits).
See P.331
Setting the Device ID
1. Select [Service Mode] → [CS Remote Care], and click [Detail Setting].
7
2. Click [Machine Setting] → [Device ID], and input Device ID (nine digits).
See P.331
Proceed to step 9.
8
Setting the telephone number of the Center
1. Select [Service Mode] → [CS Remote Care],
and click [Detail Setting].
2. Click [Machine Setting] → [Center Tele-
9
phone Number].
3. Input the telephone number of the center
using the 10-keys pad and [P], [T], [W], [-].
See P.331
Inputting the device telephone number
1. Select [Service Mode] → [CS Remote Care],
and click [Detail Setting].
2. Click [Machine Setting] → [Device Tele-
10
phone Number].
3. Input the Device telephone number using
the 10-key pad and [P], [T], [W], [-].
See P.331
322
Field Service Ver. 1.0 Oct. 2007
Procedure
Using E-mail
Encryption setting
1. Select [Service Mode] → [CS Remote Care],
and click [Detail Setting].
2. Click [Basic Setting] and select either
Encryption or No Encryption.
Retransmission interval on e-mail delivery error
• When selecting [E-mail2], set the retransmis-
sion interval on e-mail delivery error in soft-
ware SW setting.
See P.324
Setting the Respond Timeout
1. Select [Service Mode] → [CS Remote Care],
and click [Detail Setting].
2. Click [Respond Timeout] and enter the
response timeout using the 10-key pad.
NOTE
• Under normal conditions, there is no
need to change the default setting.
See P.331
Proceed to step 11.