Intake Cover; Tray Unit Front Cover/Tray Unit Rear Cover/Connector Cover - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
4.4.7

Intake cover

1. Remove the finisher unit.
See P.30
2. Remove the finisher unit rear cover.
See P.22
3. Remove the finisher unit upper cover.
See P.23
[1]
4.4.8

Tray unit front cover/Tray unit rear cover/Connector cover

[1]
1. Remove four screws [1] and remove the tray unit front cover [2].
2. Remove two screws [3] and remove the tray unit rear cover [4].
3. Remove the screw [5] and remove the connector cover [6].
NOTE
• When installing the tray unit front cover, snap the tab [7] first.
• When installing the tray unit back cover, snap the tab [8] first.
[4]
[3]
[2]
A01GF2C530DA
[7]
[8]
[1]
[2]
[7]
4. Remove the C-ring [1].
5. Remove the screw [2] and the metal
bracket [3], and the intake cover [4].
[6]
[5]
[4]
[8]
4. Other
[3]
A01GF2C531DA
25