Disassembly/Assembly Procedure; Finisher Unit Right Front Cover; Finisher Unit Left Front Cover; Finisher Unit Rear Cover - Konica Minolta bizhub C353P Service Manual

4. Other
4.4

Disassembly/Assembly procedure

4.4.1

Finisher unit right front cover

[1]
4.4.2

Finisher unit left front cover

1. Remove the front door.
See P.23
[1]
[2]
4.4.3

Finisher unit rear cover

1. Remove the finisher unit.
See P.30
[1]
[2]
[1]
22
[3]
[2]
4511F2C562DA
A01GF2C001DA
[3]
A01GF2C519DA
Field Service Ver. 1.0 Oct. 2007
1. Open the front door.
2. Remove two screws [1] and remove
the finisher unit right front cover [2].
NOTE
• At reinstallation, first fit the tab [3]
into position.
2. Remove two screws [1] and remove
the finisher unit left front cover [2].
2. Remove four screws [1] and remove
the finisher unit rear cover [2].
3. Disconnect the connector [3].