Printer Settings - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

Field Service Ver. 1.0 Oct. 2007

(4) Shift Each Job

• It will be displayed only when the optional finisher FS-519 is mounted.

• To set whether to offset each job when paper is printed using the finisher or job sep-

• Some paper type may fail to be discharged or get deteriorated loading when large

volume prints are printed using the finisher or job separator.

This function is used to print large volume prints when finisher or job separator is

(When this function is set to "OFF", the paper is discharged without offsetting the

paper to the center of the tray.)

• The default setting is ON.

(5) Bin Assignment

• It will be displayed only when the optional mailbin kit MT-502 is mounted.

• Assign the tray 1 of the finisher to the mailbin 5, and the tray 2 to the mailbin 6.

• The tray 2 can be assigned when the optional exit tray OT-602 is mounted.

• Use when assigning the tray 1 and the tray 2 of the finisher to the mailbins.

• The default setting is Don't Set.

Printer Settings

A. Basic Settings

(1) PDL Setting

• To set the PDL (Page Description Language) for PC printing.

• To fix the PDL as necessary. It usually switches automatically.

• The default setting is Auto.

(2) Number of Copies

• To set the number to be copied when not specified by the printer driver during PC

• To use when the number cannot be specified by the printer driver during printing from

Windows DOS, etc.

• The default setting is 001 copies.

(3) Original Direction

• To set the default setting for the direction of the original during PC printing.

• The default setting is Portrait.

"001 copies" (001 to 999)

13. Utility Mode

Table of Contents