Konica Minolta bizhub C353P Service Manual page 236

Field Service Ver. 1.0 Oct. 2007
<Peer>
Functions
• To register destinations used for IPsec communication.
• Settings can be made independently for different ten sets (Group 1 to 10).
Use
Setting/ <Peer>
Procedure • Among Group 1 to 10, select a group where settings are made.
• Select the key of the Group, make the following setting.
<Encapsulation Mode>
• Set a encapsulation mode used for IPsec.
• The default setting is OFF.
Tunnel Mode
<PFS Setting>
• When the transport mode is selected, set whether to use Perfect forward secrecy.
• The default setting is OFF.
<Peer Address>
• When the encapsulation mode is set, specify the IP address of destinations.
• Enter the IP address with IPv4 or IPv6 format.
<Pre-Shared Key>
• When the encapsulation mode is set, specify a Pre-shared key (Key data).
• Enter the Pre-shared key.
(7) RAW Port Number
Functions • To set the RAW port number.
Use • To set the RAW port number for the printer.
• Several data can be accepted at the same time by selecting several ports.
Setting/ 1. Select the necessary port number.
Procedure 2. When using the selected port, enter the RAW port number using
3. Press the Menu/Select key.
(8) Host Name
Functions • To set the DNS host name.
Use • To enter the DNS host name.
Setting/
• Enter the DNS host name using
Procedure
Transport Mode
ON
and
13. Utility Mode
"OFF"
"OFF"
and
keys, and press the Menu/Select key.
keys.
191