Replacing The Manual Bypass Tray Feed Roller - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
6.5.9

Replacing the manual bypass tray feed roller

A. Periodically replacing parts/cycle
• Manual bypass tray feed roller: Every 200,000 prints
B. Procedure
1. Remove the manual bypass tray unit.
See P.111
[4]
[1]
[1]
[1]
[3] [2]
A02EF2C192DA
[2]
A02EF2C193DA
A02EF2C022DA
6. Periodical check
2. Remove the harness from the edge
cover [1], and remove the wire sad-
dle [2] and the screw [3].
3. Remove the metal plate [4].
4. Remove the E-ring [1], and remove
the manual paper feed clutch [2].
5. Remove the gear [1].
29