13. Utility Mode
J. Detail Settings
(1) Network Speed
Functions
• To set the network speed.
Use
• To set the specific network speed.
Setting/
• The default setting is Auto Setting.
Procedure
100MbpsHalfDuplex
NOTE
• When Network speed setting is changed, turn off the power switch and turn it
on again more than 10 seconds after.
(2) Time Adjustment Setting
<NTP Setting>
Functions
• To set whether to enable or disable the NTP setting.
Use
• To synchronize the time between the server and the client.
Setting/
• The default setting is OFF.
Procedure
<NTP Server Address>
Functions
• To set the NTP server address.
Use
• To enter the NTP server address.
Setting/
<Input Host Name>
Procedure
• Enter the host name.
<Address Input>
• Select [Enter IPv4Address] or [Enter IPv6Address] and enter a host address.
<Port Number>
Functions
• To set the NTP server address.
Use
• To enter the NTP server address.
Setting/
• Enter the port number between 1 and 65535 using
Procedure
(3) When Invalid Cert.
Functions
• To set how to process the job when SSL certificate becomes invalid.
Use
Setting/
• The default setting is Continue.
Procedure
204
"Auto Setting"
10Mbps HalfDuplex
100MbpsFullDuplex
ON
Delete the Job
Field Service Ver. 1.0 Oct. 2007
10Mbps FullDuplex
1000MbpFullDuplex
"OFF"
and
keys.
"Continue"