Konica Minolta bizhub C353P Service Manual page 585

2. Checking the controller firmware version
Step Connecting by http
Connection Time-Out
• Select [Connection Time-out], and set the
time for the connection time out between 30
and 300 seconds.
5
ConnectionTimeout (Control panel)
• Select [ConnectionTimeout], and set the
time for the connection time out between 30
and 300 seconds.
C. Forwarding access setting
• To make the access setting for the program server which stores the firmware data.
1. Select [Internet ISW] which is available from [Service Mode].
2. Click [Forwarding Access Setting].
* When using the control panel, select [ForwardAccessSet].
NOTE
• The following setting screen appears when using the jig software. When using the
control panel, a different setting screen appears.
3. Select [User ID], and enter the user ID which is necessary for connecting to the pro-
gram server on the on-screen keyboard, and click [END].
* When using the control pane l, select [User ID], enter the user ID that is used for the
connection to the program server with the operation keys, and press the Menu/Select
key.
4. Select [Password], and enter the password which is necessary for connecting to the
program server on the on-screen keyboard, and click [END].
* When using the control panel, select [Password], enter the password that is used for
the connection to the program server with the operation keys, and press the Menu/
Select key.
5. Select [URL], and enter the directory which stores the program server address and the
firmware on the on-screen keyboard by URL method, and click [END].
* When using the control panel, select [URL], enter the URL of the directory that stores
the program server address and firmware data with the operation keys, and press the
Menu/Select key.
24
Field Service Ver. 1.0 Oct. 2007
Connecting by ftp
⎯
A00JF2E584DA