Konica Minolta bizhub C353P Service Manual page 268

Field Service Ver. 1.0 Oct. 2007
(2) Stabilization Only
Functions • The image stabilization sequence is carried out without clearing the historical data of
image stabilization control.
Use • Use if an image problem persists even after [X-Rite Caribration] has been executed.
• When [Dmax Density] and [Background Margin] of Service Mode are changed.
Setting/ 1. Call the Admin. Settings to the screen.
2. Select [Expert Adjustment] → [Image Stabilization] → [StabilizationOnly].
Procedure
3. Press the Menu/Select key to start Stabilizer.
The LED line turns off during the Stabilizer sequence.
4. Stabilizer is completed when the LED line turns blue.
13. Utility Mode
223