Forward Access Set - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

15. Service Mode

D. Connection Setting

• To set the port No. and the time for timeout when accessing the FTP server, and also

to set whether or not to enable PASV mode.

• To use when accessing the FTP server.

• To use when connecting by the PASV (passive) mode (FTP server side will inform

the connection port before connecting).

• Enter the value between 1 and 65535 using the

• Enter the value between 1 and 60 Min. using the

• The default setting is Disable.

Forward Access Set

• To register the user ID for accessing the program server where firmware is to be

• Enter the user ID (up to 64 one-byte characters) using the

• To register the password for accessing the program server where firmware is to be

• Enter the password (up to 64 characters) using the

• To register the address and directory of the program server where the firmware is to

be stored in URL.

• Enter the URL (up to 256 one-byte characters) using the

• Enter the URL which format suits the protocol to be used.

When connecting to http http:// (Host name or IP address)/ directory name or

https:// (Host name or IP address)/directory name.

When connecting to ftp ftp:// (Host name or IP address) / directory name.

D. File Name

• To register the file name of the firmware data to be downloaded.

• Enter the file name (up to 63 one-byte characters) using the

Field Service Ver. 1.0 Oct. 2007

Table of Contents