Konica Minolta bizhub C353P Service Manual page 830

Field Service Ver. 1.0 Oct. 2007
9. Click [A3] and then click [Normal Paper].
Exit direction
Exit direction
12. Click [END].
13. Make another print, and check the deviation.
14. Click [Exit] on the Service Mode screen.
15. Turn OFF the power switch, wait for 10 sec., then turn the switch ON.
A
4511F3C510DA
A
4511F3C511DA
7. Finisher operations
• If the fold is offset as shown on the left.
10. Click [-] and set the appropriate
numeric value.
Adjustment range: 0 to -10
(1 increment 0.5 mm)
• If the fold is offset as shown on the left.
11. Click [+] and set the appropriate
numeric value.
Adjustment range: 0 to +10
(1 increment 0.5 mm)
4511F3E540DA
35