6.3 Administrator Settings
6.3
Administrator Settings
Changing the administrator access code
This explains the method to specify or change the administrator access code.
To set the administrator access code
1
Follow the procedure described in "To display the Administrator Management
screens" on page 6-2 to display the Administrator Management screen.
2
Touch [Admin. 1], and then touch [Admin. Set].
3
Touch [Administrator Code Input].
4
Touch [Current Code], and then
use the 10-Key Pad to type in the
currently specified 8-digit
administrator code.
❍
Press the [C] key to erase all
entered text.
❍
To return to the previous
screen, touch [Cancel].
Di2510/Di3010/Di3510
6
6-7