Specifying Administrator Settings; To Set The Administrator Access Code - Konica Minolta bizhub 362 User Manual

Utility mode
11.5

Specifying Administrator Settings

Reminder
If the [Utility/Counter] key was pressed to register items and specify
settings, be sure to press the [Reset] key in the control panel after
returning to the standby screen (initial screen).

To set the administrator access code

1
Press [Utility/Counter].
The Utility/Counter screen appears.
2
Press [Admin. Management].
The Administrator Code screen
appears.
3
Use the keypad to type in the 8-digit
administrator access code, and then
press [Enter].
– Press the [C] key to erase all
entered text.
– To return to the previous screen,
touch [Cancel].
The Administrator Management
screen appears.
4
Press [Admin. 1] or [Admin. 2].
bizhub 362/282/222
11
11-19