Field Service Ver. 2.0 Nov. 2007
6.3.31
PWB box
1. Remove the rear left cover.
See P.70
2. Remove the upper rear cover.
See P.72
3. Remove the rear right cover/1 and the rear right cover/2.
See P.71
4. Remove the lower rear cover/1 and the lower rear cover/2.
See P.73
[3]
[1]
[3]
Confidential – for internal use only, do not distribute
[1]
[2]
[1] [2]
[2]
[1]
A02EF2C420DA
[4]
[2]
[5]
A02EF2C393DA
[2]
[1]
A02EF2C394DA
5. Remove the harness from five edge
covers [1] and seven wire saddles
[2].
6. Disconnect the connector [1], and
remove the harness from the wire
saddle [2] and the edge cover [3].
7. Remove two screws [4], and remove
the MFP board cooling fan motor [5].
8. Remove the harness from two wire
saddles [1], and disconnect the con-
nector [2].
9. Remove three screws [3] of the cool-
ing fan motor/2.
6. Other
103