Hcoe Bin Full Flag Removal; Sensor (Hcoe Bin Full) With Flag Removal - Lexmark M52 Series Service Manual

HCOE bin full flag removal
1
Remove the HCOE top cover. See
2
Remove the HCOE sensor cover. See
3
Remove the two screws (A), and then remove the bin full flag.
Sensor (HCOE bin full) with flag removal
1
Remove the HCOE sensor cover. See
2
Remove the two screws (A), and then release the bracket.
3
Disconnect the cable (B), and remove the sensor with flag.
"HCOE top cover removal" on page
"HCOE sensor cover removal" on page
"HCOE sensor cover removal" on page
Parts removal
548
545.
547.
547.
4064