Feeder Cleaning - Canon NP6551 Operator's Manual

■

Feeder Cleaning

This function enables automatic cleaning of the
RDF's feeding roller when it becomes dirtied with
pencil lead, etc. If your originals have black streaks
or appear dirty after feeding them in the RDF,
perform Feeder Cleaning. Cleaning is
accomplished by repeatedly feeding blank originals
(copy sheets) through the RDF.
Select FEEDER CLEANING.
Place 10 blank LTR-size copy sheets in the
1
RDF.
NOTICE: ●
Use only LTR-size copy sheets to clean the
feeder.
●
Make sure that the auxiliary tray is closed.
Press the [START] key.
2
While cleaning the feeder, the message to the
right appears in the touch panel display.
Feeder cleaning is completed after approximately
25 seconds and the screen returns to the Basic
Features screen.
NOTICE: ●The blank originals used for cleaning pick up the
dirt on the feeder roller.
MEMO:
●
To stop Feeder Cleaning before it is completed,
press the [STOP] key.
4-21