Main Functions - Canon NP6551 Operator's Manual

Main Functions

■ Automatic two-sided original feeding
When the Two-sided mode is set, the RDF automatically turns over two-sided originals so
that both sides can be copied.
■
Sorting without a Sorter
Even if your copier is not equipped with the optional Sorter or Stapler Sorter, copies can
be sorted into sets arranged in page order.
To set the Sort mode, select [SORT] key in the touch panel display. The RDF repeatedly
feeds the originals to the platen glass the number of times necessary to make the
requested number of copies.
Copies are output to the copy tray as shown in the
figure to the right.
NOTICE:
●
When sorting without the Sorter, in general you
should make no more than 50 copies of any one
set of originals. If you make more than 50 copies,
the originals might become folded or wrinkled and
not feed smoothly.
■
SADF tray
When an original is inserted into the SADF tray, it is automatically fed in and copied.
Using the SADF tray you can copy a lightweight original because unlike originals placed in
the original tray, an original placed in the SADF tray is fed straight.
Furthermore, using the SADF tray, you can make interrupt copies without having to open
the RDF.
MEMO: ●
The SADF tray can be set so that originals are automatically fed into it and copies are made
immediately after the key has been pressed. (See "SADF Auto Feed," on p. 4-8.)
Start
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1-25