Canon NP6551 Operator's Manual page 50

Adjust the slide guides to fit the size of the
4
original.
NOTICE: ●
Make the necessary copy settings before
inserting the original.
Place the side to be copied face down and
5
insert the original. The original is pulled in and
copying starts automatically. When the Job
Duration Display is set to ON in Additional
Functions and the appropriate modes are set,
the remaining time necessary to complete the
copy job can be displayed.
CAUTION:
● Do not touch the Sorter bins while making copies as
this may result in personal injury.
MEMO:
●
After copying begins, you cannot change the copy
quantity, paper size, copy ratio or other copy
settings.
●
Job Duration Display can be set to ON or OFF in
Additional Functions. (See "Job Duration Display,"
on p. 4-10.)
●
The original returns to the SADF tray after it has
been copied.
NOTICE: ●
You can only insert one original at a time into the
SADF tray. If you insert two or more a paper jam
occurs.
●
If the original is curled, smooth it out completely
before inserting it.
●
If copying does not start after inserting the original
in the SADF tray, press the
copying automatically after inserting the original,
you must change the "Additional Functions"
setting. (See "Additional Functions/SADF Auto
Feed," on p. 4-8.)
■
Stopping before copying is completed
If you want to stop the copier before copying is
completed, press the
MEMO: ●
Several sheets might be output even after the Stop
key has been pressed.
●
Remove any paper remaining in the duplexing unit
by referring to the section on "Clearing Paper
Jams", on pp. 6-2 to 6-32.
key. To start
Start
Stop
key.
Display Contrast Energy Saver
Stop
Clear
2-11