Auto Start - Canon NP6551 Operator's Manual

Auto Start

After turning the power ON, while waiting for the copier to warm up, you can program the
copy settings for the first copy job and press the [Start] key. After the copier has warmed up,
copying begins automatically.
Auto Start is available at the following times:
● While you are waiting for the copier to be able to make copies after you have turned
the power ON
● While you are waiting for the copier to warm up after you have checked it for
jammed copy paper (You cannot change the copy settings at this time.)
When the message to the right appears in the touch
panel display, you can use Auto Start.
Place your originals.
■ For instructions on how to place an original on
the platen glass, see p. 2-17.
■
For instructions on how to place originals in
the RDF, see p. 2-18.
■
For instructions on how to place an original in
the SADF tray of the RDF, see p.2-19.
Program the copy settings. (See p. 2-4.)
1
MEMO:
●
If you are using Auto Start then you cannot change
the copy settings after you have checked the copier
for jammed paper.
Display Contrast Energy Saver
Reset
Stop
Guide
Additional Functions
Clear
Interrupt
Start
2-27