Canon NP6551 Operator's Manual page 113

Select the [FRONT COVER/BACK COVER/
2
SHEET INSERTION] mode, then press the [OK]
key.
MEMO:
●
The [FRONT COVER], [BACK COVER] and
[SHEET INSERTION] modes can all be selected at
once.
●
You can cancel the selection by pressing the
corresponding mode key again.
To copy onto the cover/insertion sheet, select
3
the paper to be copied onto and then press the
[OK] key.
MEMO: ●
The display will change depending on what you
selected in step 2.
Make the following settings depending on the
4
mode selected.
MEMO:
●
The display will vary depending on the selected
mode.
■ When selecting "BACK COVER" and "1-sided"
copy mode
Select the side to be copied onto, then press the
[OK] key.
■ When selecting "SHEET INSERTION"
Set all the positions to be inserted into the
copies, then press the [OK] key.
For the insertion positions, scroll the highlighted
display up and down with the [▲] or [▼] key and
enter the settings with the Number keys (
MEMO: ●
You can insert up to 20 insertion sheets.
●
When specifying "SHEET INSERTION PRINTED",
the display changes to "SECTION 0 → PAGE 0"
●
To cancel a specific sheet insertion page setting,
scroll the highlighted display up and down with the
[▲] or [▼] key and then press the
the setting.
3-16
- ).
1
0
Clear
key to cancel
C