Select the Auto Count function or specify the
5
number of originals.
■ If you want the originals to be counted
automatically, press the [OK] key.
MEMO:
●
If you place your originals in the RDF, the originals
are counted automatically. Counting is performed to
ensure that Image Combination is performed from
the first page of the originals.
■ Specifying the number of originals
Press the [CANCEL COUNT] key.
Specify the number of originals using the [+] and
[–] keys, or the Number keys (
press the [OK] key.
• Press the [+] key to increase the number of
originals.
• Press the [–] key to decrease the number of
originals.
• To directly enter the number of originals, press
the Number keys (
MEMO:
●
You can change the number of originals entered
with the Number keys, using the [+] and [–] keys.
Press the [PAPER SELECT] key to manually
6
select the copy paper size. (See "Manual Paper
Selection," on p. 2-24.)
NOTICE:
●
You cannot set Auto Paper Selection; manually
select a paper size (see p. 2-16).
MEMO:
●
The copier automatically selects the copy ratio
depending on the selected paper size (Auto Zoom).
After you have finished making the settings,
press the [DONE] key .
Proceed to copy in the usual way.
(See "Making Copies," on p. 2-4.)
MEMO:
●
To cancel the settings, press the
(The copier returns to the Standard mode.)
3-22
-
), then
1
0
-
).
1
0
Reset
key.