Canon NP6551 Operator's Manual page 73

When you finish copying, press the
7
that the Interrupt (
the Interrupt mode is canceled.
MEMO: ●
If you do not cancel the Interrupt mode, you cannot
perform normal copying. After you finish copying in
the Interrupt mode, be sure to press the
cancel the Interrupt mode.
●
Pressing the
mode.
Lift the RDF. Then, remove your original from
8
the platen glass.
Lower the RDF.
9
If the interrupted copy job was being run using
the platen glass, place the original (that you
removed in step 2) back on the platen glass.
Press the
10
Start
The copier resumes the interrupted copy job.
2-34
Interrupt
) indicator goes out, and
Reset
key will not cancel the Interrupt
key.
Interrupt
key so
Interrupt
key to
Guide
Additional Functions
Interrupt
Stop
Clear
Start
Clear