Canon NP6551 Operator's Manual page 9

■
Preset Copy Ratios (see p. 2-40)
Use preset copy ratios when you want to
enlarge or reduce a standard-size original to a
standard-size copy.
LGL original
CITY
■ Fit Image Mode (see p. 2-42)
When copying an original where the image fills
the page, parts of the image may be cut off on
copies. Using the Fit Image mode, the image is
slightly reduced before copying so that the
entire original image is reproduced on copies.
Original
CITY
■
Different Size Original Mode (see p. 3-39)
You can feed different-size originals together in
one group in the RDF, provided that the
leading edge of each page is the same length.
11"x17"original
LTR original
CITY
Original feeding
direction
■ One-sided Mode (see p. 2-58)
Makes one-sided copies from one-sided
originals.
11" x 17" copy
CITY
CITY
LTR copy
Copy
CITY
CITY CITY
Leading edge length
■
Reduction/Enlargement (see p. 2-43)
● Zoom (see p. 2-43)
Enables you to select any copy ratio between
49 and 204%, in 1% increments.
Original
CITY
● Zoom Program (see p. 2-45)
The copier automatically calculates the copy
ratio based on measurements for the original
and desired copy images.
Original
CITY
Width of the
original image
● Auto Zoom (see p. 2-48)
The copier automatically selects the
appropriate copy ratio, based on the size of the
originals and the selected copy paper.
Original
CITY
Original
CITY
Copies
CITY
CITY
CITY
Copy
CITY
Width of the
copy image
Copy
CITY
Copy
CITY
7