Placing an Original in the SADF Tray of the RDF
Open the SADF tray.
1
Adjust the slide guides to fit the size of your
2
original.
NOTICE:
●
Make the necessary copy settings before
inserting the original.
Place the side to be copied face down and
3
insert the original. The original is pulled in and
copying starts automatically.
NOTICE:
●
You can only insert one original at a time into the
SADF tray. If you insert two or more, a paper jam
may occur.
●
If the original is curled, smooth it out completely
before inserting it.
●
If copying does not start after inserting the original
in the SADF tray, press the
copying automatically after inserting the original,
you must change the "Additional Functions"
setting. (See "Additional Functions/SADF Auto
Feed," on p. 4-8.)
MEMO:
●
The original returns to the SADF tray after it has
been copied.
key. To start
Start
2-19