Proceed To Copy In The Usual Way - Canon NP6551 Operator's Manual

Since Auto Paper Selection is the standard copy
1
setting, normally no operation is necessary to
set this feature.
If a paper size is shown in the center of the
touch panel display, press the [PAPER
SELECT] key to select [AUTO].

Proceed to copy in the usual way.

(See "Making Copies," on p. 2-4.)
MEMO:
●
When using Auto Paper Selection, the selected
paper size is indicated as follows:
• If you place your original on the platen
glass, the paper size appears in the touch panel
display after the platen glass cover is lowered.
• If you place your originals in the RDF, the paper
size appears in the touch panel display after you
press the
• If you place your original in the SADF tray, the
paper size appears in the touch panel display
when the original is fed onto the platen glass.
key.
Start
2-23