Feeder Unit - Canon NP2120 Service Manual

B. Feeder Unit

1. Feeder Unit

Note:
Make sure that the drum unit, transfercorona
1) Relpace the feeder unit.
2) Remove the main motor unit.
3) Disconnect the connector (J309) from the DC
controller PCB, and remove the grounding wire.
Figure 4-45
3) Remove the E-ring and the bushing.
Figure 4-46
6
4-l
4) Remove the insioe leftcover, and remove the E-
ring and bushing.
Figure 4-47
5) Lift the fixing assembly side of the feeder unit,
and pull it toward the front to remove.
Figure 4-48
C A N O N NPZl20/2Wl KV.0 MAY 1590 PAINTUI IN JAPAN IIMPAIME AU JAPONI