Canon NP6551 Operator's Manual page 140

Select the desired memory location.
4
MEMO:
●
Memory locations that contain a stored copy job are
highlighted.
●
In the display at the right, modes are registered in
the M1-M5 keys.
■ If you have pressed a key which has already
been registered
The message at the right appears asking you to
confirm that you want to change the registered
settings.
If you want to change the settings for a key:
Press the [OK] key. The registered copy settings
are replaced by the new settings.
To cancel registration:
Press the [C] key, and select another key.
When you have finished registering settings, the
5
message to the right is displayed.
MEMO:
●
After about two seconds the screen returns to the
display for step 2.
3-43